If you’ve found your way to this blog post, chances are you’re in the midst of a cleaning crisis – your trusty Shark vacuum is refusing to charge on its dock.
Frustrating, right? Well, fear not, because you’re not alone in this struggle, and I’m here to help you navigate through the perplexing world of vacuum charging dilemmas.
So, grab a cup of your favorite beverage, sit back, and let’s embark on a troubleshooting journey to revive your vacuum and restore your cleaning routine to its former glory.
Shark Vacuum Not Charging On Dock-Causes and Fixes
Power Source
While it might seem obvious, the power source itself can sometimes be the culprit behind your Shark vacuum not charging properly. Here are a few additional steps to consider when examining the power source:
Voltage and Current: Check if the power outlet you’re using meets the voltage and current requirements specified by Shark for the vacuum’s charging dock.
Using an outlet with inadequate voltage or current could result in slow or incomplete charging.
Switched Outlet: Some power outlets are controlled by light switches or wall switches. Make sure the switch associated with the outlet where your vacuum is plugged in is turned on.
It’s easy to overlook this simple step, but it can save you a lot of frustration.
Surge Protectors and Extension Cords: If you’re using a surge protector or an extension cord, try plugging the vacuum directly into the wall outlet instead.
Sometimes, surge protectors or extension cords can interfere with the charging process, especially if they are damaged or not functioning correctly.
Test with Another Outlet: To rule out the possibility of a faulty outlet, try plugging the vacuum into a different outlet in another room.
If the vacuum charges successfully in a different outlet, the original outlet may need to be inspected or repaired by a qualified electrician.
Circuit Breakers and Fuses: If none of the above steps resolve the issue, check your home’s circuit breaker panel or fuse box.
A tripped circuit breaker or a blown fuse could be the reason why the outlet isn’t providing power. Rese Bad Charging Contacts and Sensors.
Also Read… Smart Life Hotspot Not Showing Up
Bad Charging Contacts and Sensors
If you’ve confirmed that the power source is not the issue, the next step is to inspect the charging contacts and sensors on both the vacuum and the charging dock.
These components play a crucial role in establishing a proper connection for charging. Here’s how to address potential problems:
Clean Charging Contacts: Over time, dust, dirt, and debris can accumulate on the charging contacts of both the vacuum and the dock.
Inspect these contacts and, if necessary, clean them with a soft, dry cloth. Ensure that there are no obstructions preventing a solid connection. A clean contact surface is essential for efficient charging.
Check for Damage: Examine the charging contacts on both the vacuum and the dock for any signs of damage, such as bent pins or corrosion.
If you notice any issues, it’s crucial to address them promptly. In some cases, gentle manipulation with a small tool may help straighten bent pins, but exercise caution to avoid causing further damage.
Verify Dock Alignment: Ensure that the vacuum is correctly aligned with the charging dock.
Some Shark vacuum models have specific indicators or lights that signal when a proper connection is established.
Refer to your user manual to understand the correct alignment for your specific model.
Inspect Sensors: Modern vacuum models often feature sensors that detect when the vacuum is correctly docked. If these sensors are malfunctioning, it can lead to charging issues.
Make sure that there are no obstacles or foreign objects blocking the sensors on both the vacuum and the dock.
If your vacuum has LED indicators, check if they display any error codes related to docking or charging.
Perform a Hard Reset: In some cases, a hard reset can resolve issues related to charging contacts and sensors.
Turn off the vacuum, unplug it from the dock, and remove the battery (if applicable). Wait for a few minutes before reinserting the battery, plugging the vacuum back into the dock, and turning it on.
This can reset internal electronics and may resolve sensor-related issues.t any tripped breakers or replace blown fuses as needed.
Also Read… How Much Does It Cost To Run Alexa In UK
Battery Issues
If you’ve ruled out problems with the power source and the charging connection, it’s time to turn your attention to the vacuum’s battery.
Over time, batteries can degrade, leading to issues with charging and overall performance. Here’s how you can troubleshoot potential battery-related problems:
Charging Time: Take note of how long your Shark vacuum typically takes to charge.
If it suddenly takes much longer than usual to reach a full charge or doesn’t hold a charge for an adequate amount of time, it may be a sign that the battery is reaching the end of its lifespan.
Battery Age: Consider the age of your vacuum. Rechargeable batteries have a limited lifespan, and after a certain number of charge cycles, they begin to lose their ability to hold a charge.
If your vacuum is several years old and you’ve been using it regularly, it might be time to replace the battery.
Battery Replacement: Check with Shark’s official website or customer support to see if replacement batteries are available for your vacuum model.
Shark often provides replacement parts for their products, including batteries. Replacing the battery is usually a straightforward process, and many users find that it breathes new life into their vacuums.
Resetting the Battery: Some Shark vacuum models have a reset function for the battery. Check your user manual for instructions on how to perform a battery reset.
This can sometimes recalibrate the battery and improve charging performance.
Visual Inspection: Examine the battery for any signs of physical damage or swelling. If the battery appears bloated or shows signs of leakage, it should be replaced immediately.
Damaged batteries can pose a safety risk and should not be used.
Temperature Considerations: Extreme temperatures can affect battery performance. If your vacuum has been exposed to very high or low temperatures, allow it to return to a moderate temperature before attempting to charge.
Extremely hot or cold conditions can temporarily impact battery function.
Also Read…. Can You Listen To Music On Alexa Without Amazon Prime
